Before detection Huawei Android phones, enable 'Manufacture' mode:
in dial pad type *#*#2846579#*#* for Qualcomm and Kirin based models, or *#*#14789632#*#* for MTK, then select
'ProjectMenu',
'Background settings',
'USB ports settings',
'Manufacture mode'.
Step by step guide for other Huawei phone unlock:
https://www.dc-unlocker.com/huawei_p...lock_tutorials
Check account status
User : C4F3K1N9
Credits left : 16
================================================== =================
================================================== =================
DC - Unlocker 2 Client 1.00.1332
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Phone : VIE-L09
Model : Huawei phone in fastboot mode
IMEI : 860865031147049
Serial NR. : N9Q7N16711000990
Firmware : VIE-L09C432B170
IMEI1:860865031147049
FB LockState: LOCKED
USER LockState: LOCKED
locked
Battery state: 8979mv
===================================================================
===================================================================
DC - Unlocker 2 Client 1.00.1392
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM35
Model : Huawei HiSilicon Kirin Android phone
Serial NR. : YED7N16701004874
Firmware : VIE-C900B103
===================================================================
Reading unlock codes...
Unlock codes:
NCK : 1796899135513939
NetSub : 1644113168482575
SP : 2911209397327492
Unblock : 2946886165709045
===================================================================
http://www.gsmunlockhn.com/imei-services/all-huawei---nexus-frp-remove-service-only-via-imei
-Run HUAWEI_UNLOCK_CLIENT.exe and ( important ) wait 10 seconds for init.
-Enter Username / Password and press check account button to be sure you have credits
- Before phone detection connect cable to usb and enable Manufacture mode !
in dialer enter this codes (for Huawei ID remove enter this code in emergency dial screen)
Qualcomm and HiSilicon: *#*#2846579#*#*
MTK: *#*#14789632#*#*
WindowsMobile : ##2846579#
And in popup menu select ProjectMenu
then
1.Background setting
2.USB ports setting
Select Manufacture mode
Now press Read Phone info button
If phone detected - you can do all opearation which you need (unlock sim, bootloader code read , imei repair or Huawei ID remove)
|